Swarovski Dragonfly Earrings
The earrings in the picture are made with Tanzanite AB Swarovski crystals.
To make these Swarovski crystal earrings you will need.
- 2 Swarovski 6mm Bicones
- 2 Swarovski 5mm Bicones
- 2 Swarovski 4mm Bicones
- 4 Swarovski 3mm Bicones
- 2 Silver Plated 2 inch head pins
- 2 Sterling Silver Ear Wires
- 2 Dragonfly Wing Beads
- Chain nose pliers
- Round nose pliers
- Wire cutters
If you are not sure what any of these items are please have a look through our jewellery making glossary.
Thread 2 of the 3mm Swarovski Crystals onto one of the headpins.
Then thread on:
- 1 x 4mm Swarovski
- 1 x 5mm Swarovski
- 1 x Dragonfly wings
- 1 x 6mm Swarovski
Trim the wire to 1cm above the top of the 6mm crystal.
Turn a simple loop at the top.
Try to get the loop as closed as possible so that the end of it meets
the wire coming out of the top of the headpin.
Carefully open the loop on the Ear Wires.
Thread on your dragonfly and close the loop, the same way you opened it, using 2 pairs of pliers.
Repeat to make the other earring.